Evaluation of a Business Code of Ethics Essay Example | Topics and Well Written Essays - 1000 words

Evaluation of a Business Code of Ethics - Essay Example 17). FedEx moves more than 25million packages per day and they deliver approximately 6.5 billion packages each year (Shactman, 2012). The mission statement for FedEx is: FedEx Corporation will produce superior financial returns for its shareowners by providing high value-added logistics, transportation and related information services through focused operating companies. Customer requirements will be met in the highest quality manner appropriate to each market segment served. FedEx Corporation will strive to develop mutually rewarding relationships with its employees, partners and suppliers. Safety will be the first consideration in all operations. Corporate activities will be conducted to the highest ethical and professional standards (Farfan, 2012). Section 2: Analysis The type of ethical system that FedEx uses is a rights-based system. In their Code of Ethics (the Code), they emphasize the rights of the people, whether they are employees or customers. As an example, the Code is wr itten in regular language so that everyone can understand what is said. The Code also has typical questions and answers after each section so that anyone reading the Code can apply what the code says to specific situations. FedEx emphasizes that â€Å"Lawful and ethical behavior is critical to our continued success and is required†(FedEx, 2012, â€Å"Code† p.5) . The company also states that although the entire Code is important, there are some parts that will effect employees and contractors, while other parts of the Code may be more relevant to management. They have created a Code that is important for everyone to read, understand, and ask questions if they do not understand something. How the Code is Used and its Results The major aspects of the Code state that anyone who sees anything that is against the Code should report these instances. This seems to create challenges because some people may something they think is a violation and this may not be the case. Manag ement. Management is responsible for their own adherence to the Code, but they also are responsible to make sure that their employees are also adhering to the code. Managers are to be the example to all employees of both ethical and lawful behavior. The company believes that â€Å"Proper business conduct encourages loyalty from our team members† (FedEx, â€Å"Code†, p. 5). They expect managers to have a high level of positive conduct in every situation. Managers are expected to respect the company and its employees and to read and understand the Code on many levels. They are to take charge of their departments and take seriously any reports by their employees about Code violations. They are also supposed to make sure they take appropriate action when there are violations. Managers are also supposed to monitor the employees to anticipate any problems that may occur. As an example, they are to â€Å"anticipate, prevent, and detect† (FedEx, â€Å"Code†, p. 6 ) any violations within their departments. Employees. FedEx has in place a way for employees to complain if they see a violation of the Code. As an example, if an individual feels they have not been promoted because the manager is making a biased judgment instead of one made on merit, they can follow the protocol to have this assessed. Anything that happens in the workplace that they feel is against the Cod

Honda Malaysia Essay Example for Free

Honda Malaysia Essay Honda made its first foray into Malaysia in the 1960s, establishing Kah Motors Sdn Bhd as the distributor for its products. On 15 November 2000, Honda Motor Co. Ltd. of Japan cooperates with DRB-HICOM Berhad and Oriental Holdings Berhad, and then Honda Malaysia Sdn Bhd was established. Since then, Honda Malaysia has been a strong and active player in the Malaysian automobile market. In 2003, the company set up a manufacturing plant in Malacca. Spread over 80 acres of land, the Pegoh Plant has a total built-up area of 13 acres and rolled out its first car, a CR-V, in January 2003 . With this plant, not only is Honda Malaysia optimistic of achieving high sales every year, it has further strengthened Hondas reputation in Malaysia. By 2010, over 225,000 cars had been managed to sell by Honda Malaysia. It also received the ISO 14001 and ISO 9001 accreditations because of its good Environment Management System and Quality Control. The slogan of Honda is â€Å"The Power of Dreams†, their aim is to change the dreams into reality. One of their dream is making all cars as green as the forest, and now they are achieving this slowly. The Honda Integrated Motor Assist (IMA) system incorporates two power sources, producing a synergised technology to enhance driving performance and environmental protection. IMA system not only gives superb fuel efficiency, it helps to save the environment by cutting down on carbon dioxide discharges while enabling a sporty driving experience. With having this technology, Honda managed to reach another landmark in the Malaysian automobile. Honda’s hybrid model was first launched in December 2010. Its advanced technology and stylish designed had attracted people from making an order of 500 units within the first 10 days of launching. Advanced performance, futuristic designed, comfortable are the elements that Honda cars can always have high market share in the non national car segment. All Honda cars come with the i-VTEC engine, which is famous because of its perfect balance of high performance and fuel economy. Honda Cars produce various models which are Civic, Civic Hybrid, City, Accord, CR-V, CR-Z, Freed, Insight, Jazz, Jazz Hybrid, Stream. These models are produced to fulfil various type of customer. As an example, Accord is more spacious, sporty, and powerful, it is mostly designed for men. City is more affordable and its size engine range is lower. While Freed can contain 6 peoples, it is more suitable for those who have big family. Safety also one of the most important element when Honda are developing cars. Honda insist of making cars with high levels of safety to ensure everyone can have a safe and pleasant journey whenever they go. Honda’s G-CON (G-Force Control) technology is developed to scatter and absorb impact energy, reducing injuries and significantly improving safety for everyone involved in an impact, be it the driver, passenger or the pedestrian. VSA(Vehicle Stability Assist) technology keeps driver and passengers safe by keeping the vehicle stable and preventing skidding to avoid accidents. Honda established an indoor all-weather vehicle-to-vehicle crash test facility located at the Tochigi Research and Development Centre, Japan. The centre conducts a diverse range of crash test from a variety of directions and weathers, at varying speeds and vehicles of different sizes to better understand, design, and protect against real world collisions. It is also equipped with the technology to capture different viewpoints and scenarios of tests conducted. Once the customer purchase car, Honda believes a lifelong relationship with the customer begins, so it is important for Honda to build an on-going relationship through high quality after-sales services. To provide optimal standard of sales and high quality after-sales service, Honda Malaysia offers the 3S – Sales, Service and Spare Parts facilities at 56 of the 59 Honda dealerships across Malaysia. The 3S concept is a constituent of Honda Malaysia’s policy of prioritising customer satisfaction while creating an enjoyable customer experience.

Seven Virtues vs. Seven Sins :: essays research papers

Seven Virtues versus Seven Sins   Ã‚  Ã‚  Ã‚  Ã‚  Virtues are character strengths consistently applied to moral decision making. They show positive patterns of behavior. However, vices are negative patterns of behavior, often harmful to one’s self or others. The seven virtues are faith, hope, charity, prudence, justice, fortitude, and temperance. The seven deadly sins are pride, envy, gluttony, lust, wrath, greed, and sloth. Practicing one virtue can protect one from the temptation to perform an act which is sinful.   Ã‚  Ã‚  Ã‚  Ã‚  Charity is love. It is devotion to others, which requires strength, effort, conviction and courage on our part. People who are generous and helpful to others don’t have many signs of envy; their charity protects them from it. Envy is the opposite of charity; it is the desire to have things that other people have, such as possessions, traits, and abilities. Charity, however, helps protect from envy, keeping one away from envious temptations.   Ã‚  Ã‚  Ã‚  Ã‚  Prudence is basically common sense. A prudent person thinks â€Å"What is the right thing for me to do?† rather than rushing in without thinking. A prudent person is protected from being prideful. Pride is extreme belief in one’s own abilities to the extent that it interferes with the recognition of the grace of god. Pride is the sin that other sins come from, because if you are prideful, you believe that what you are doing is the right thing, and you cannot be dissuaded from it.   Ã‚  Ã‚  Ã‚  Ã‚  Temperance is control; doing things in moderation, rather than allowing oneself to go to extremes. A temperate person does not overindulge himself. Gluttony is the opposite; it means to overindulge oneself. Gluttony can also be shown as selfishness, because a gluttonous person always wants more.   Ã‚  Ã‚  Ã‚  Ã‚  Faith is to be firmly attached to something or someone by love. A faithful person truly loves and commits to their partner. Lust is the opposite of faith. It is sexual craving and obsessive desire. Lust promotes the like that â€Å"this is all there is†. Lust blinds people and prevents them from seeing true love and commitment.   Ã‚  Ã‚  Ã‚  Ã‚  Fortitude is courage. It is when we are called on to stand up for what we believe is right, while going against the grain. Someone who has fortitude can bear something unpleasant rather than becoming irritated and wrathful. Wrath is anger; it is the opposite of fortitude. Wrath is in a person who rejects love, choosing anger instead.   Ã‚  Ã‚  Ã‚  Ã‚  Justice reminds us that all people deserve to have their basic needs met.

Visual Description Nefertiti

For my visual description, I decided to write about Infertility from Outmost, created between BCC. Infertility represents royalty, and many women view her as a symbol for beauty. Found in the city of Kathleen along other items in the sculptor studio that represented the royal family. This three dimensional limestone sculpture standing 20†³ tall, represents the wife of Pharaoh Generate. Modeling her face to make it look subtle, the artist used very thin layers of plaster.Looking at this sculpture, one would feel as they are looking at a life like person, which is why it's remarkable. The plaster starts thin to define her face and becomes thicker when creating the neck and the head dress. The pupil of the right eye was created with what appears to be black paint, but the left eye doesn't have a pupil present. Infirmities teal colored crown, has a gold band looped around the bottom.A ribbon is wrapped around her crown, with each end stopping above her left and right ear. A erasures (signifying royalty) is above brow on the headdress, yet broken. The skin and bone structure, very much symmetrical can be shown as elegant as she looks. The artist used a contour technique to create her face, high cheekbones and the hollowness of her cheeks.. Looking at the lines used, it can be seen as subtle movements. The carved movements, help create amazing cheekbone structure.From her headdress to her cheeks, a triangle can be formed, continuing to the lines of her neck, under her chin a perfect triangle Is created. This sculpture In the round when viewed from the side, can be seen as creating a 90 degree angle. Walking around the sculpture you can see the symmetrical used to create her headdress and make this sculpture life like. Although the damages to the ear and headdress makes you realize how ancient this Is, her beauty seems to travel.

Social Class in to Kill a Mockingbird

There are many different social classes in â€Å"To Kill A Mockingbird. † The factors that separate people into these social classes are their skin color and their occupation. For example, Atticus, Scout, and Jem are part of the highest social class. They are part of this social class because Atticus is a lawyer, which makes him a highly respected person in the community. He is also white, which, at that time was a very important factor that chose who belonged in what social class. Scout and Jem are his children and therefore are also part of this social class. Another person in this same social class is Miss Maudie Atkinson.She grew up with the Finch’s and is an old friend of theirs. She is now Atticus’s neighbor and is loved by his children. Aunt Alexandra is also part if this because she is known as the â€Å"perfect example of what a southern lady should act like. † She is part of the Finch’s family and is highly respected by the community. One of the very important rules of belonging in this social class is to treat white people with lesser status kindly. It is an unwritten rule that white people with a higher social class than other white people must be hospitable and treat them with respect.An example of this is when Walter Cunningham is invited by Jem to come over for dinner. When Scout notices Walter using a lot of gravy during dinner she is rude to him and as a result is punished by Calpurnia. The reason for this is because Walter is of a lower class and was invited to eat with Atticus and his family. As a result, it is rude not to let him do and eat what he wants to. An example of a person who is in the next social class is Mrs. DuBose. She is a nasty women and one of the factors that hints that she is not part of the higher social class is the way she talks to her community members.She is supposed to be kind and respectful to the white people of Maycomb, like Jem. Even though she is nice to Atticus, she talks badly about him behind his back. That is not a quality that a person of a high status would have. Therefore, she isn’t part of that social class. The next social class is the poor, yet respectable white people. The Cunningham’s are in this class because even though they are poor, they manage to live their life by borrowing money and paying back the money borrowed with items from the farm instead of money. Under them are theEwell’s, who are poor and disgusting. They are completely rude and so are their children, but they are still in a higher social class than black people since they are white. The next social class is wealthy or middle-class black people. Calpurnia is a part of this class and only is for the reason that she is black. She has all the qualities of a good southern lady, and has perfect manners. She is respected and in good relations with the Finch family. Calpurnia would be in the same social class as Atticus Finch if she weren’t black. Another p erson who is in this class is Reverend Sykes.He met Jem and Scout in church and showed how much he respected them and their father for defending the Tom Robinson case. He welcomed them and was very friendly, therefore in the same class as Calpurnia. The last social class is the poor and black people. Lula is in this social class. She is disgraceful to the black people and her motto is that the black people should stick to own community and the white should stay with there’s. She was harsh and shallow to someone who is of her kind (Calpurnia) and she was harsh to two innocent kids just because they are white. There is a very interesting relationship between the white people and black.The majority of the black people is more mature and has much more class. They accept themselves and their status. They accept how they don’t get credit for all their work. They accept always having the worse of things, like the First Purchase church, which is a very beaten down church. They accept not getting an education with barely any complaints. No matter how much they tolerate, the white people cannot stand them at all and are so afraid of the truth because it means going against a white person’s word. The fact that white people don’t treat white people equally contributes greatly to the way the social classes are separated.

3214407-23559500850900-14605000165735-14859000 Essays - Free Essays

3214407-23559500850900-14605000165735-14859000 Essays - Free Essays 3214407-23559500850900-14605000165735-14859000 370967016510 Yo vivo en Hope Pastures, Jamaica. Yo vivo con mis padres, Carolyn y Orrett .00 Yo vivo en Hope Pastures, Jamaica. Yo vivo con mis padres, Carolyn y Orrett .108077010160 Hola ! Me llamo Jada Harrison . Tengo 16 a nos .00 Hola ! Me llamo Jada Harrison . Tengo 16 a nos . -874277315797200375509718993870045046903034030 Estudio a AISK, cerca de mi casa. 00 Estudio a AISK, cerca de mi casa. 45091352459990 Soy una hija unica . 00 Soy una hija unica . -6305553602990 En la fotografia , llevo un sombrero negro, una bufanda , una chaqueta rosa , los jeans y las zapatillas negras y blancas . 00 En la fotografia , llevo un sombrero negro, una bufanda , una chaqueta rosa , los jeans y las zapatillas negras y blancas . 290893565747900041668707261225005424170668972500-5969063512700073624858791150035966405083810 Me gusta corer, bailar , dormir , eschuchar musica , y conversar con mis amigos . Mi materia favorita es las matematicas o la quimica .00 Me gusta corer, bailar , dormir , eschuchar musica , y conversar con mis amigos . Mi materia favorita es las matematicas o la quimica .2968942395827300-7480306120130005539105326326500565277029337000centerbottom005207040322500-6350001431290 Mi correo electronico es [emailprotected] Mi correo electronico es [emailprotected]

A birthday to Remember Professor Ramos Blog

A birthday to Remember Majority of adults believe that being a kid is being that little girl or boy that has no say of his or her own, but depends solely on adults. We believe that anything can be forced on them, and all they need do is to accept without any objection. That is the story of Rachel in â€Å"Eleven† written by Sandra Cisneros,who on her eleventh birthday still did not feel like it. She talked about how it feels to be a certain age, but you still act and feel like the ages before that. The behaviors and emotions still reflect the child in you. She said â€Å"the way you grow old is kind of like an onion or like the rings inside a tree trunk or like my little wooden dolls that fit one inside the other, each year inside the next one† (Cisneros 6). This quote explains how she feels as an eleven year old, but still have the characteristics and emotions of a Ten, Nine, Eight, Seven, Six, Five, Four, Three, Two, and One year old. She gave an illustration of how on her eleventh birthday, she was not given a choice to express herself but was forced to agree with her teacher on the issue of a red sweater that wasn’t hers but belong to someone else. She wished she was One hundred and two years old, only then would she have been able to stand for herself and Mrs. Price would have listened to her and she would not have put the ugly red sweater on her table. At the age of hundred and two, Rachel would have known what and how to tell her teacher she was not the owner of the red sweater, instead of struggling within herself to reject the sweater. She knew she was been treated unfairly by her teacher just because she’s eleven and she is meant to respect and obey her teacher without any given opportunity to express herself but to do according to her teacher’s command. When Mrs. Price asked â€Å"Whose is this?† holding up the ugly red sweater, everyone said not mine and the teacher believed them, not until Sylvia Saldivar stood up and said â€Å"I think it belong to Rachel†. For her teacher to believe her classmate over her is a form of intimidation to her and she wished she was an age much older than eleven with the confidence of an adult and she would be able to stand up for herself. From the story, the teacher believed every other person when they said the sweater wasn’t theirs. She also believed Sylvia, who hates Rachel and was looking for ways to hurt her, said to their teacher that the ugly sweater was Rachel’s. Mrs. Price refused to believe Rachel, but believed Sylvia. This made Rachel sad and felt the teacher doesn’t like her, that’s why she never believed her when she said the sweater wasn’t hers. Also, she knew Sylvia hates her that was why she told a lie against her to hurt her on her Eleventh birthday. She said and I quote â€Å"maybe because I’m skinny, maybe because she doesn’t like me.†After this experience, Rachel felt that the teacher favors her other classmates over her and this really made her sad felt intimidated. Favoritism is generally the case in many school classrooms, according to an article written by a researcher on Favoritism in the classroom, he said â€Å"Teachers are said to favor certain students over others at school and especially in their classes.† (Aydogan 2008). Sadly, when one child is being favored over the other in a class by their teacher, it makes the less favored child become self-withdrawn and lack interest throughout the school semester. The classroom is a place where children go to acquire knowledge and respect for others. The teacher is meant to treat all her students equally and fairly. The ethical principle of teaching profession includes â€Å"professionalism, responsible service, fairness, equality, respect for human freedom, compassion honesty, continuous development, integrity, trust, maintaining a healthy and safe environment.† (Aydogan 2008). As a teacher, you give your students equal right to express themselves in class. That was not the case for Mrs. Price who never gave Rachel the right to accept or reject the ugly red sweater. Everyone expect to be treated right on their birthdays. They want to be happy and share this happiness with their loved ones. Rachel was looking forward to going home after school because she knew her mum was baking a cake and when her papa gets home they will all sing â€Å"happy birthday song† for her. Unfortunately, her happiness was short lived when Sylvia Saldivar decided to accuse her wrongly and made her teacher Mrs. Price put the ugly sweater on her desk. She tried to be eleven and act like a big girl, but the three year old in her was struggling to come out through her eyes. Mrs. Price was quick to believe Sylvia over Rachel. This could be because Sylvia is the outspoken one and Rachel is the timid one. Most teachers will have different emotions towards outspoken and timid children in their classroom. After all the deed had been done, and the ugly sweater has been placed on her desk. Rachel tried so hard to hide the three year old in her that wants to come out through her eyes but instead, kept the face and posture of an eleven year old that she is. Just when she thought all was over, Mrs. Price came and insist that she put on the ugly red sweater that smells of cottage cheese. That was the moment she lost all control and all the years inside her pushed through her eyes and she cried bitterly. The teacher here failed in her ability to manage her classroom and manage the situation of the ugly sweater thereby making a child feel terrible on her birthday. Not only did she force Rachel to wear an ugly, smelly sweater that was not hers, she also failed to apologize to Rachel when the real owner of the sweater Phyllis Lopez came up and claimed the sweater. Rachel said,†Mrs. Price pretends like everything’s okay.†(Cisneros 9). Adult sometimes take advantage of vulnerable children just because they think they can, and there’s nothing the child can do about it. They fail to realize that treating a child badly could destroy the child’s self esteem. Unfortunately, a birthday that could have been a happy one for Rachel turned out to be one she does not want to ever remember because of a misconception that happened in her classroom. Aydogan, Ä °smail. â€Å"Favoritism in the Classroom: A Study on Turkish Schools.†Journal of Instructional Psychology, vol. 35, no. 2, June 2008, pp. 159–168.EBSCOhost, search.ebscohost.com/login.aspx?direct=truedb=a9hAN=33405329site=ehost-live. Cisneros, Sandra. â€Å"Eleven† Women Hollering Creek and other stories. Vintage Contemporaries, New York 1992. Pp 6-9. Picture Credit: https://poshmark.com/listing/5205a679e1267a23300225a8

Identifying Independent and Dependent Clauses

Identifying Independent and Dependent Clauses An independent clause (also known as a main clause) is a word group that has both a subject and a verb and can stand alone as a sentence. A dependent clause (also known as a subordinate clause) is a word group that has both a subject and a verb but cant stand alone as a sentence. A sentence may consist of a single independent clause, multiple independent clauses linked by a conjunction, or a combination of independent and dependent clauses. The key to distinguishing a dependent clause is this: a dependent clause adds information to the independent clause. Perhaps it gives context about time, place, or identity, perhaps it answers why? the action in the independent/main clause is happening, perhaps it clarifies something from the main clause. Whatever the case may be, the information contained in that clause is in support of the the main clause. This exercise will help you recognize the difference between an independent clause and a dependent clause. Instructions: For each item below, write independent if the group of words is an independent clause or dependent if the group of words is a dependent clause. The details in this exercise have been loosely adapted from the essay Bathing in a Borrowed Suit, by Homer Croy. ____________________I went to the beach last Saturday____________________I borrowed an old bathing suit from a friend____________________because I had forgotten to bring my own bathing suit____________________while the waist on my borrowed suit would have been tight on a doll____________________my friends were waiting for me to join them____________________when suddenly they stopped talking and looked away____________________after some rude boys came up and began to make insulting remarks____________________I abandoned my friends and ran into the water____________________my friends invited me to play in the sand with them____________________although I knew that I had to come out of the water eventually____________________a large dog chased me down the beach____________________as soon as I got out of the water Answers independentindependentdependentdependentindependentdependentdependentindependentindependentdependentindependentdependent

Cyber securiy and cloudl computing Research Proposal

Cyber securiy and cloudl computing - Research Proposal Example several information technology (IT) based processing including cloud computing, social media networking, international communication, and global positioning system (GPS) navigation. Another aspect of the revolution is accessibility of the internet, whereby it has become easier for a person to have access to the internet today than two decades back. With the use of media devices such as smart phones, smart watches, and tablet computers, the internet is today one of the most portable technological inventions that can fit into every corner and space (Ziltrain, 2008). Indeed it cannot be denied that the revolution that has characterised the internet has several benefits to offer the ordinary user. In the estimation of Rehmeyer (2007), not only does the use of the internet today offers advantages but that the absence or non-usage of the internet comes with so much discomfort and disadvantages. Even though this position cannot be debated, the risks and vulnerabilities that the complexity o f the internet poses to individual, organisations and nations cannot be denied. In the opinion of Owens and Lin (2009), the best way to make the most out of the internet in today’s complex dynamic Web 2.0 environment is to ensure adequate cyber security for users. Without this, the list of how beneficial the internet is in today’s environment can go on but the real value that is expected to be derived may never be achieved to its fullest. The reason for this claim is that as news of cyber breaches continues to flood the airwaves, people become sceptical about their fate in using the complex and dynamic Web 2.0 for various purposes including cloud computing and electronic commerce (e-commerce) (Ziltrain, 2008). In such an atmosphere of mistrust and fear, the Web 2.0 will be seen as useful only for some of the most conventional purposes that come with limited or no risk such as gaming, information search, and downloading. Meanwhile as it has been hinted already, there are several

Economy of Pakistan Essay Example | Topics and Well Written Essays - 1750 words

Economy of Pakistan - Essay Example Country also faces the problems of illiteracy, and charges of Fiscal ineptitude. But despite such decelerating factors, Pakistan is on the path of growth with the new government of President Musharraf continuing with a reformist economic agenda, assisted by support from multilateral institutions. Pakistan's economic performance appears to be improving gradually. A thaw in the relations with India is also helping the country in economic progress. In the 2007 country profile Country-Watch points out that Pakistan is a developing nation with agriculture accounting for about 25 percent of its GDP, employing about 45 percent of the people (101). In recent years agriculture is declining as a percentage of total output with other economic activities picking up as well, but still agriculture sector remains the primary economic activity in Pakistan. A high annual population growth rate of two percent not matched with equal rise in opportunities and resources for the country, is also proving t o be a big drain on its economy. Growth of economy and business prospects in a country depend mainly on., macroeconomic factors, political stability, economic liberalization, human resource development index and levels of corruption in the country. A stable business environment requires normalization of the fiscal position, with an increased tax base and a more transparent allocation of resources. A stable government helps in infusing confidence amongst investors. Recognizing the need for liberalization, Government of Pakistan is moving to increase the pace of privatization of state entities, and is removing a number of qualitative and quantitative import restrictions. Financial sector is also seeing a reduction in state involvement with the onset of more and more private banks (EIU, 31). Thanks to such efforts, after several years of declining economic growth, owing to political upheavals, Pakistan has registered good growth rate since 2002. GDP grew 5.5 percent in 2003, 7.1 percent in 2004, and 7 percent in 2005. Such sustained growth also resulted in developing the human resource index as well. Development in human resources is also critical factor in judging a country for investment purposes. Pakistan, a country with less than 50% literacy is still in the process of attaining the ratings that its neighbor India has already acquired. In fact lack of such development has prevented Pakistan from joining India in the lucrative software develop ment, BPO and ITES sector (Country-Watch, 101). The human resources index suffers on account of high unemployment rate. A big percentage of Pakistan, especially women is unemployed because. EIU Statistics (40) point out that in 2000, the unemployment rate for young women was about twice that of the rate for young men. In 2005 the overall unemployment rate was 7.7 percent. The labor force grew at an annual average rate of 4.5% during the 1990s, but growth slowed to less than 3% in 2000-05. At end-December 2005 the labor force stood at 47.7m and the number of employed at 44m, leaving 3.7m (7.7% of the labor force) as unemployed. In addition there's substantial underemployment i.e. there are sectors like Agriculture which employ more people than are actually required. The agriculture sector has been the least tax paying one in this part of the subcontinent, due to couple of reasons ranging from lack of

Discussion Assignment Example | Topics and Well Written Essays - 250 words - 4

Discussion - Assignment Example In this context, power exists in three phases i.e. coercive, reward, and legitimate. In the same way power is often realized when somebody in the organization or military setting has knowledge or ability in a given area over the rest of the people. In a way, the other people depend on such knowledge and this creates a sense of power in the person. Similarly, the ownership of valuable information in a given field is normally a direct source of power that is often exercised by many people. In most situations, it is often realized that power emanates from actions that are geared towards the five bases of power. These include reward, coercive, legitimate, and expert and referent power. Actions in these respects are normally very important sources of power and people are often drawn into situations of influence over the rest. In any case, the extent to which somebody exercises their power and influence over the rest is normally the most important parameter in the context of power dynamics. Power can always be used wrongly by certain people if structures are not in place to control such power. In the same way power has always been used effectively by other people create positive

Data Mining (mining for gold) Assignment Example | Topics and Well Written Essays - 500 words

Data Mining (mining for gold) - Assignment Example This way, the data is understood or is used for any future marketing campaigns. This type of technique is usually used by many analysts. Issues relating to security of the information obtained by companies about individual customers. This information is prone to crimes such as hacking creating major security concern for both customers and companies. Many customer do not give out their information easily because of privacy complains. This way it is not possible to accurately draw relationship or trend in any particular data as the data may be considered incomplete. Airline companies use data mining techniques to improve their servicing towards customers. The data that is mined to find hidden patterns is about frequent fliers. The issues selected for mining in the frequent flier program are firstly to identify customer characteristics, their most frequent flying zone, class and period of the year in which they usually fly. Secondly, to discover pattern between the sectors based on the activities of the customers. The data mining technique is applied to customer data in three ways: category type, booking type and sector type. Category type revealed that discretionary and invitees were having lower than average use usage whereas members flew more. Booking type disclosed that about 88% of the customers booked their tickets via agents. Data mining can be used by many different industries. One of the types of industry is the super market industry. Data mining can help them identify customer buying patterns i.e. to place products in such a way that can lead to an increase in the buying behavior of the customer e.g. Wal-Mart’s case of nappies and beer. The other industry that can use data mining is the automobile industry. Customer preferences can be found and all future automobile can be based on aspects usually preferred by customers (e.g. low CO2 emission cars and increased promotion of hybrid cars to control

Analyse the business situation facing KuIuIa.com from a marketing Essay

Analyse the business situation facing KuIuIa.com from a marketing point of view - Essay Example Its advertising campaigns were designed to influence human psychology and impacts of its visual and textual content is linked to human behaviour. Thus, its advertisement that makes common man, a super hero was hugely appealing for local population. Though it has networked with car rental firms, it needs to create wider linkages with other facilities to ensure customers convenience. Kululu.com faces serious threat from new competitors, especially from SAA or South African Airways which has largest market share. As such, Kululu.com must adopt flexible strategies to meet new challenges and exploit internal capabilities vis-a-vis customer relationship, sustainable business practices, diversification, acquisition, new product development and its linkages with its parent companies to gain competitive advantage. Ansoff’s matric promotes four growth strategies for gaining competitive advantage: market penetration; market development; diversification; and new product development. It sh ould therefore analyse different strategies of growth (Solomon et al., 2012). Both Comair and British Airways have huge credibility across the globe. With increasing competition, it must evolve new products and services and develop strategic business linkages with its parents’ company so that they can share database of customers with ease. Recommendations It should further enhance its customer services and develop an organizational culture that empowers employees. By increasing the number of customer service agents it would be able to provide passengers with improved personal service and emotional support and security at the time of crisis. It should increase frequency of destination-to-destination flights to maintain its popularity. Specialized short haul flights... †¢ It should increase frequency of destination-to-destination flights to maintain its popularity. Specialized short haul flights are increasingly being preferred by people who are frequent fliers. With its low cost strategy, it would attract more small and medium business class. †¢ As a growth strategy, leveraging partnership across different fields that may complement its wider business objectives is hugely critical issue that needs to be incorporated within its business strategy. Thus, it should forge alliances with hotels, resorts, tour operators and event managers so that it can constantly provide its customers with new ways to benefit and enjoy unique experience. Offering integrated packages would attract more families for vacations and encourage small and medium businesses to take its employees for work-cum relaxation programs. †¢ It should promote sustainable business practice and introduce attractive offers to its customers which would be able to give them a chance to travel in BA and Comair flights. It could be in terms of number of flights or frequency of fliers to particular destination which would make customers eligible for bonus points that could earn them discount tickets in BA and Comair. This would significantly increase customer database and help it to maintain its competitive advantage.

Data Mining (mining for gold) Assignment Example | Topics and Well Written Essays - 500 words

Data Mining (mining for gold) - Assignment Example This way, the data is understood or is used for any future marketing campaigns. This type of technique is usually used by many analysts. Issues relating to security of the information obtained by companies about individual customers. This information is prone to crimes such as hacking creating major security concern for both customers and companies. Many customer do not give out their information easily because of privacy complains. This way it is not possible to accurately draw relationship or trend in any particular data as the data may be considered incomplete. Airline companies use data mining techniques to improve their servicing towards customers. The data that is mined to find hidden patterns is about frequent fliers. The issues selected for mining in the frequent flier program are firstly to identify customer characteristics, their most frequent flying zone, class and period of the year in which they usually fly. Secondly, to discover pattern between the sectors based on the activities of the customers. The data mining technique is applied to customer data in three ways: category type, booking type and sector type. Category type revealed that discretionary and invitees were having lower than average use usage whereas members flew more. Booking type disclosed that about 88% of the customers booked their tickets via agents. Data mining can be used by many different industries. One of the types of industry is the super market industry. Data mining can help them identify customer buying patterns i.e. to place products in such a way that can lead to an increase in the buying behavior of the customer e.g. Wal-Mart’s case of nappies and beer. The other industry that can use data mining is the automobile industry. Customer preferences can be found and all future automobile can be based on aspects usually preferred by customers (e.g. low CO2 emission cars and increased promotion of hybrid cars to control

Constraints on Developing Countries Essay Example | Topics and Well Written Essays - 1500 words

Constraints on Developing Countries - Essay Example This essay declares that the future for a level playing field and the transition of developing countries appears to already be underway since the majority of the World Trade Organisation is composed of developing countries which are striving to take part in the international industrial trade setup. These countries are following the guidelines given by the United Nations to increase their ability to produce as well as the quality of their production. In the industrial world, much like the business world, the wishes of the client reign supreme. Since the clients of these nations are industrialised countries, the developing nations will have to bring up their standards of production to remain competitive. The future of economic liberalisation does not move as much towards opening of markets and free trade. In reality, it is moving towards a trade of technology and industrial know-how which will allow industrial production to take place at the same level in a developing country as it doe s in developed countries. This paper makes a conclusion that constraints do exist and developing countries are at a significant disadvantage when compared to industrialised nations but the author also thinks that the world is becoming more equal. Just a few decades ago the American Empire reigned supreme in all aspects of advancement and culture but the future leadership of the world could belong to the European Union. It is clear to me that industrial relationships and the volume of industrial trade will form a significant portion of the equation in determining which country leads the world into the 22nd century.

Why We Need Horror Movies Essay Example for Free

Why We Need Horror Movies Essay In â€Å"Why We Crave Horror Movies,† Stephen King writes about horror movies, why we like them, and the purposes they serve us. One of the main reasons he makes in his essay is that he believes that there is a dark and sinister side to all people that craves to see the suffrage and despair of others and that this is why we need these movies. King says that these particular kinds of movies are good in the way that the purpose they serve is to satisfy those desires and urges. Given these two statements, it shows that even though we may have urges from time to time to cause harm or wish ill will that these films serve as a healthy release. King writes in his essay, â€Å"The potential lyncher is in almost all of us (excluding saints, past and present; but then, most saints have been crazy in their own ways), and every now and then, he has to be let loose to scream and roll around in the grass.† (110) This is simply a statement that ultimately we are just human beings expressing emotion. Although horror movies are almost always presented with people suffering horrible things like demons, possessions, and even death, they serve as a healthy release to feel the satisfaction for those desires. And they let us just cast aside our normal socially acceptable behaviors to just indulge them. Another statement King writes in his essay is that, â€Å"If we are all insane, then sanity becomes a matter of degree.† (110) This is a statement that says sanity is something that can be measured. If this is true then sanity is something that must be controlled in order to maintain civility in society. Horror movies for the normal average person as stated before simply serve as an outlet to release some bad desires; however, some people do take that desire beyond the movies and actually do go out and commit crimes and cause harm to others. To conclude, sanity is something that can be easily kept in check by most people, some not as much. And this is why we need an outlet such as movies like these to keep ourselves in check from causing actual damage and harm.

Improving Energy Efficiency in Buildings

Improving Energy Efficiency in Buildings Introduction Climate change is a major world issue, average temperatures have risen across the globe by 1oC between 1906 and 2005 with a more rapid increase over the last 50 years (Conserve Energy Future, 2017], this rise has been attributed to global warming (McGrath, 2017). Emissions of gases such as carbon dioxide (CO2) and Methane (CH4) contribute to this global warming and are known as greenhouse gases (NASA, 2017), though the Environmental Protection Agency in the United States of America stated in 2017 that CO2 was not a primary contributor to global climate change (McGrath, 2017). Energy use is a major producer of these greenhouse gases, governments around the world have put in place measures to reduce the production of these gases by introducing rules to improve energy efficiency (Conserve Energy Future, 2017]. In the UK energy use, can be broken down into 4 main areas, Transport, Domestic, Industrial and Services Sector (Department for Business, Energy, and Industrial Strategy, 2016). This report will look at energy usage of buildings and techniques that can be utilised to improve a buildings energy efficiency. UK Energy Usage The breakdown of the UKs energy usage across the 4 main areas in 2015 was as follows (Department for Business, Energy, and Industrial Strategy, 2016): Transport 40% Domestic 29% Industry 17% Services Sector 14% The fuels used to provide this energy were a mixture of Gas, Electricity, Solid fuels, Petroleum and Bioenergy (Department for Business, Energy, and Industrial Strategy, 2016). Both industry and transport use large amounts of energy undertaking their processes be it production lines or the operation of various modes of transport such as trains or buses rather than the running of buildings (Department for Business, Energy, and Industrial Strategy, 2016). Energy usage is fundamental to the operation of any building be it for lighting, heating, cooling, cooking or other services such as lifts (Wade, Pett and Ramsay, 2003), with most of this energy being provided by either gas or electricity (Department for Business, Energy, and Industrial Strategy, 2016). Thus, Improving the energy efficiency of a building can considerable reduce the amount of energy that is used. Over the last 30 years there has been a considerable increase in energy usage by office blocks due to the rise in the use of technologies such as large computers and the increased use of air conditioning systems (Wade, Pett and Ramsay, 2003). In the service sector office buildings are second to retail units in the levels of energy that they consume, and these office buildings contribute to 1.1% of the UK CO2 emissions each year (Pothitou, Connaughton and Torriti, 2015). Figure 1: Energy Usage of a standard Office and Efficient Office, Source: (Knissel, 1999) To become more energy efficient a building needs to use less energy to undertake the same tasks or role (International Energy Agency, 2017), as figure 1 above shows, improvements from a standard office block to a super-efficient office block can reduce energy usage by 70% (Knissel, 1999) Lighting In a commercial office, the lighting uses up to 50% of all the electricity consumed (Irish Energy Centre, 1995) and 35% of the total the energy consumption of the building (Knissel, 1999). Lighting can be broken down into several types these being access lighting, task lighting, emergency lighting and effects lighting (Irish Energy Centre, 1995). For a building to become more energy efficient attention needs to be paid to the lighting design to reduce the level of usage, technological advances mean that improvements in the efficiencies of lighting can be done in several ways (Energy Saving Trust, 2017), some of these can also be applied to existing office buildings without too much work having to be undertaken other methods need major alterations to incorporate into older buildings and are more suited to new buildings or buildings going through major refurbishment (The Renewable Energy Hub, 2016). The simple replacement of existing lamps within light fittings can reduce energy usage, with more modern fluorescent tubes being 25% more energy efficient than older versions and compact fluorescent lamps using up to 75% less energy than an old tungsten lamps (Irish Energy Centre, 1995), these tungsten lamps having been invented over 100ÂÂ   years ago(Energy Saving Trust, 2017) Light Emitting Diodes lamps (LEDs) are also now available and are up to 80% more efficient than the tungsten lamps (Energy.gov, 2013), when invented in the 1960s LEDs were no more efficient than tungsten lamps it has only been in the last ten years that great improvements in their efficiency has been achieved (Energy.gov, 2013). This method of energy efficiency can be applied to existing buildings without too much trouble but does have a cost over and above normal maintenance costs of changing the lamps but by the energy saved the LED lamps can pay back their extra initial cost within 3 years. (Corkhill, 2014). Another area where lighting can be made more efficient is insuring that it is only used when required and that lights are turned out when not in use (Open Technology, 2016). The use of sensors such as proximity or absence detection also means that the lights come on automatically when occupied and turn off after a period of non-occupancy (Open Technology, 2016), the dis-advantages of this can that someone sitting still at a desk may not activate the sensor and the light may go out while they are still there. Office areas can also be divided into different lighting zones with different controls for each zone, lights then only need to be on in areas of the office that are occupied or being used (Knissel 1999) leading to further efficiency.ÂÂ   The use of daylight sensors to adjust the amounts of artificial light used when there is sufficient natural light helps reduce energy usage (Carbon Trust, 2017). This may be achieved by having lights that either switch off or dim depending on levels of natural light in an area and can be used alongside lighting zones so that the lights closest to the windows dim separately when the natural light levels increase (Open Technology, 2016). Dimming controls and timers can also be utilised to minimise energy usage, it may be that less lamps operate at a lower light level at certain times of the day such as during the evenings or night while cleaning of the office is being undertaken (Open Technology, 2016). The room layouts can also play a part in energy efficiency by positioning desks to make more use of natural light and by painting walls and ceilings light colours can maximise the effectiveness of the lights (Irish Energy Centre, 1995). Thermal Comfort All individuals working in an office want to feel comfortable and not to be either to hot or too cold no matter what time of the year it is (Seton, 2015). There are 6 factors which can affect the thermal comfort of people within an office environment, these can be broken down into environmental factors and personnel factors (HSE, 2016). The 4 environmental factors being Air Temperature, Air velocity, radiant temperature and relative humidity (Harish, 2017), the other 2 factors are personnel these being clothing and metabolic heat (HSE, 2016). The Chartered Institute of Building Services Engineers (CIBSE) have identified several elements of a building that will affect the thermal environment these being items such as glazing, ventilation, air tightness, thermal mass, plant and equipment, waste heat along with working patterns, activities and workforce profile (Seton, 2015). CIBSE also provide recommendations on the temperatures levels, air supply and illuminance to provide a comfort level that will be acceptable to 80% of the occupants (Woods, 2015), this does though mean that there will be 20% that do not find it comfortable (Woods, 2015). Due to personnel preferences, it is not possible to find settings that are acceptable to all occupants and the recommendations are levels deemed to be a healthy office environment (HSE, 2016) Figure 2 CIBSE Comfort recommendations for Offices Conditions Temperature (Â °C) Air Supply per person (l/s/person) Illuminance Noise Rating (NR) Summer (Light Clothing) 22-25 8 500 35 Winter (Warm Clothing 21-23 8 500 35 Source: CIBSE Guide A: Environment Design 2015 (Woods, 2015) Many office blocks have heating, ventilation and air conditioning systems (HVAC) to maintain these comfort levels (Carbon Trust, 2017), figure 1 earlier in this report shows that in a standard office these systems use up to 42% of the all the energy consumed by the office block (Knissel, 1999). For the most efficient use of these HVACs systems it is important to design the buildings fabric to reduce the load imposed on these HVACs systems (Harish, 2017). For example, radiant temperature can involve both heat gain and heat loss through the structure, this is especially so near large windows, in these instances the structure can be designed with solar shading such as brise soleil or reflective blinds on elevations facing the sun to reduce solar heat gain (Harish, 2017). The windows can also be designed with triple glazed glass along with blinds that have thermal insulating properties to help reduce heat loss during the cooler months of the year (Harish, 2017). These measure help reduce the amount of work that either the cooling system or heating systems must undertake (Knissel, 1999), the disadvantage that any shading or blinds have is that they reduce the amount of natural light entering the building leading to the extra usage of artificial lighting. Heating in office buildings is usually provided by a central boiler (CIBO, 1997), the efficiency of the boiler can depend upon the fuel used, back in 1997 the typical energy efficiency for boilers based on fuel varied greatly as shown in figure 3. Figure 3 Typical Efficiency for New Boilers in 1997 Fuel Full Load Efficiency % Low Load Efficiency % Coal 85 75 Oil 80 72 Gas 75 70 Biomass 70 60 Source: (CIBO, 1997) Improvement in technology has meant boiler efficiency has greatly improved since 1997, micro combined heat and power (mCHP) boilers are now available for offices and domestic properties, prior to 2006 these were only economically available on extremely large scales (The Renewable Energy Hub, 2016). CHP boilers simultaneously generate useful heat and electricity making better use of the fuel being used (Ecoliving, 2017). Figure 4 Micro Combined Heat and Power Boiler Schematic. Source: (The Renewable Energy Hub, 2016). These combined heat and power boilers can be up to 98% efficient, with the electricity produced being either used by the building or returned to the main grid (The Renewable Energy Hub, 2016). A disadvantage of CHP is that it is only useful in a building that requires both hot water and electricity, if other methods are used for heating and hot water is only used for washing then a CHP is not practical (Dinneen, 2014). As well as improved efficiency of boilers and air conditioning systems better controls also help reduce energy usage, for every 1Â °C lower that the heating is run it reduces energy usage by up to 8% (Carbon Trust, 2017) so setting heating levels at the lower level of 21Â °C set by CIBSE rather than the upper winter level of 23oC can reduce the energy usage by up to 16%. In open plan areas controls to both heating and cooling should also not be accessible to the occupants as there could be instances where one individual turns up the heating in their area and another turns down the air conditioning in their zone and the two systems then try to work against each other (Carbon Trust, 2017). Some areas of a building such as computer hub rooms will require cooling all year due to the heat generated by the equipment within them (Wade, Pett and Ramsay, 2003), the use of a heat recovering system can be utilised to use this heat for other parts of the building reducing the load put on the heating systems and reducing the energy usage (Energytechs, 2017). These heats recovering units operate by using hot air from within the building to heat fresh cool air from the external environment (Energytechs, 2017) this warmed fresh air is then circulated around the building reducing the heating requirements (Wade, Pett and Ramsay, 2003) Figure 5 Heat Recovery Unit, Source: Energytechs, 2017 Conclusion Technology and energy efficiency of services for buildings is continually improving this can be seen by the advances in LED technology for lighting and the use of Combined Heat and Power boilers in smaller scale buildings that have advanced over the last 20 years (Wade, Pett and Ramsay, 2003). Buildings can only be built as energy efficient as the technology available at the time of construction, some energy efficiency measures can be installed later if the technology becomes available but this can be costly and disruptive (Wade, Pett and Ramsay, 2003) It is though important when considering energy efficiency of buildings services to ensure that comfort levels for occupants are maintained for the tasks they are undertaking and are not compromised to achieve great energy efficiency (Irish Energy Centre, 1995) Modern technology makes more use of automated controls to assist in improving energy efficiency within buildings, this helps to remove occupants interference with controls and the potentially unbalancing of the systems resulting in more energy usage. As already mentioned earlier in this report the guidance figures given by CIBSE will only be acceptable to 80% of the occupants (Woods, 2015) the other 20% will be looking to alter the settings to suit their requirements so good communication with the occupants on the reasons the strategy for control settings will help with the implementation of the energy efficiency measures (Irish Energy Centre, 1995). References Carbon Trust, 2017, [Online] Available at: https://www.carbontrust.com/resources/guides/energy-efficiency/lighting/ [Accessed on 15th March 2017] CIBO, 1997. Energy Efficiency Industrial Boiler Efficiency [Online] Available at: http://invenoinc.com/file/Energy-Efficieny-adn-Industrial-Boiler-Efficiency.pdf [Accessed on 25th March 2017] Conserve Energy Future, 2017. 35 Surprising Facts about Global Warming. [Online] Available at:ÂÂ   http://www.conserve-energy-future.com/various-global-warming-facts.php [Accessed on 14th March 2017] Corkhill, K. 2014. LED Payback Calculation [Online] Available at: http://www.jarvislights.com/led_payback_calculation_blog/ [Accessed on 23rd March 2017] Department for Business, Energy, and Industrial Strategy, 2016, Energy Consumption in the UK [Online] Available at: https://www.gov.uk/government/collections/energy-consumption-in-the-uk [Accessed on 14th March 2017] Dinneen, P., 2014. Pros and Cons: Combined heat and Power (CHP) [Online] Available at: http://www.kinsley-group.com [Accessed 23rd March 2017] Ecoliving, 2017. What is CHP? [Online] Available at; http://www.ecolivinguk.com/combined-heat-power/what-is-chp/ [Accessed on 25th March 2017] Energy.gov, 2013. History of the light bulb [Online] Available at: https://energy.gov/articles/history-light-bulb [Accessed on 21st March 2017] Energy Saving Trust, 2017. Energy Efficient Lighting [Online] Available at: http://www.energysavingtrust.org.uk/home-energy-efficiency/lighting [Accessed on 23rd March 2017] Energytechs, 2017. Heat Energy Recovery Ventilation [Online] Available at: http://energetechs.com/heat-recovery-ventilation/ [Accessed on 23rd March 2017] Harish, A., 2017. How to Improve Thermal comfort in an Office Environment. [Online] Available at: https://www.simscale.com/blog/2016/07/improve-thermal-comfort-office/ [Accessed on 21st March 2017] HSE, 2016. The six basic factors [Online] Available at: http://www.hse.gov.uk/temperature/thermal/factors.htm [Accessed on 21st March 2017] Irish Energy Centre, 1995, Energy Efficient lighting in OfficesÂÂ   [Online] Available at: http://www.seai.ie/Publications/Your_Business_Publications/Technology_Guides/Energy%20Efficient%20Lighting%20in%20Offices.pdf [Accessed on 15th March 2017] Knissel, J., 1999. Energy efficient Office Buildings [Online] Available at:- http://www.iwu.de/fileadmin/user_upload/dateien/energie/energy_efficient_office_buildings.pdf [Accessed on 23rd March 2017] McGrath, M., 2017. Extreme an Unusual Climate trends continue after record 2016 [Online] Available at: http://www.bbc.co.uk/news/science-environment-39329304 [Accessed on 21st March 2017] NASA, 2017. Global Climate Change, Vital Signs of the Planet [Online] Available at: https://climate.nasa.gov/evidence/ [Accessed on 14th March 2014] Open Technology, 2016, Intelligent Lighting Controls [Online] Available at: http://www.opentechnologyuk.com/ligo/ [Accessed on 15th March 2017] Pothitou, M., Connaughton, J. and Torriti, J. 2015, Energy Demand Working practices in Office Buildings [Online] Available at: https://www.reading.ac.uk/web/files/tsbe/MaryPothitou_TSBE_Conference_Paper_2015.pdf [Accessed on 14th March 2017] Seton, 2015. Thermal Comfort in the workplace [Online] Available at: http://www.seton.co.uk/legislationwatch/article/thermal-comfort-workplace/ [Accessed on 21st March 2017] The Renewable Energy Hub, 2016. Micro Combined Heat and Power [Online] Available at: https://www.renewableenergyhub.co.uk/micro-combined-heat-and-power-micro-chp-information/how-does-microchp-work-in-a-home-or-business.html#jump_21929 [Accessed on 25th March 2017] Wade, J., Pett, J. and Ramsay, L., 2003, Energy efficiency in offices: assessing the situation [Online] Available at: http://pett-projects.org.uk/wp-content/uploads/2009/03/ACE-Research-2003-05-Energy-Efficiency-in-offices-Assessing-the-situation-report1.pdf [Accessed on 14th March 2017] Woods, P., 2015. CIBSE Guide A: Environment Design 2015, LONDON: Chartered Institute of Building Services Engineers.

Monster Beverage Corporation Essay examples -- Hansen Beverage, Monste

Monster Beverage Corporation The Hansen Beverage company (recently changing their name to Monster Beverage Corporation on January 5th of 2012), was a family owned and operated company in the 1930’s, selling freshly squeezed juices to local film studios. In the 1970’s, one of the Hansen brothers decided to transition their beverage business into marketing ‘natural sodas’. This was the upturn of the company that led them to where they are today. Today, Monster Beverage Corp. has transformed into the largest energy drink company in Canada with sales of more than $ 2.1 billion in 2012. Monster beverages have always been, and still claim to be free of preservatives, caffeine, sodium, artificial flavors and colors. Although many people believe that all energy drinks contain high levels of caffeine and are not healthy, the company’s mission statement which has not changed since Jan 5th, 2012 when the company changed its name, states otherwise. THE MISSION STATEMENT The mission of Monster Beverage Corp. is â€Å"to satisfy consumers' needs for superior quality and great tasting, healthy, natural and functional beverages. Our beverages will be positioned as an upscale brand and will often be marketed at a premium for competitive mainstream products.† The mission statement provides Monster Beverage Corp. With the information needed for the company’s vision. It answers the following questions: †¢ What business are we in? †¢ Who are our customers? †¢ What offerings should we provide to give these customers value? Monster Beverage Corp. shows that they understand their customers’ needs. They are a successful business with higher growing revenue every year. Their revenues did decrease during the economy’s recent recession (2008... ...s.com 24. http://www.slideshare.net 25. http://www.cspnet.com/sites/default/files/magazine/article/pdf/CMH12-bevs-specialty.pdf 26. http://www.energyfiend.com/the-15-top-energy-drink-brands 27. http://com4001chung.alliant.wikispaces.net/MONSTER+Consultants+Final+Doc 28. http://uoinvestmentgroup.org/wp-content/uploads/2009/08/Hansen.pdf 29. http://goodmorningpill.tumblr.com/ 30. http://www.gurufocus.com 31. http://www.wikinvest.com/stock/Hansen_Natural_(HANS) 32. http://www.hansens.com/us/en/about-us/mission-statement/) 33. http://monsterbevcorp.com/ 34. http://investors.monsterbevcorp.com/releases.cfm 35. http://www.fda.gov 36. http://ods.od.nih.gov/About/DSHEA_Wording.aspx 37. http://www.epa.gov/regulations/laws/osha.html 38. http://www.monsterenergy.com 39. http://www.cspnet.com/sites/default/files/magazine/article/pdf/CMH12-bevs-specialty.pd

Application of Nanotechnology in Diagnosis and Treatment of Diseases: Cancer

RESEARCH PROPOSAL APPLICATION OF NANOTECHNOLOGY IN DIAGNOSIS AND TREATMENT OF DISEASES – CANCER. BY OLOWOKERE JOHN 1. 0 Introduction Nanotechnology is the study, design, creation, synthesis, manipulation, and application of materials, devices, and systems at the nanometer scale (One meter consists of 1 billion nanometers). It is becoming increasingly important in fields like engineering, agriculture, construction, microelectronics and health care to mention a few. The application of nanotechnology in the field of health care has come under great attention in recent times.There are many treatments today that take a lot of time and are also very expensive. Using nanotechnology, quicker and much cheaper treatments can be developed. By performing further research on this technology, cures can be found for diseases that have no cure today. We could make surgical instruments of such precision and deftness that they could operate on the cells and even molecules from which we are made – something well beyond today's medical technology. Therefore nanotechnology can help save the lives of many people. Mohd & Jeffery, 2007). The specific purpose of this report is to explain the application of nanotechnology to the diagnosis and treatment of diseases such as cancer in the field of medicine. Applications such as drug delivery system, tissue reconstruction and disease diagnosis and treatment shall be discussed. This report will be of particular interest and help to researchers in the genetic engineering and biotechnology department of the federal university of technology Minna, and other research institutions. 1. 1 Problem StatementThe specific purpose of this report is to delve into the application of nanotechnology to diagnose and treat diseases in the field of medicine using our own indigenous technology. Applications such as drug delivery system, tissue reconstruction and disease diagnosis and treatment shall be discussed as it relates to cancer. 1. 2. Just ification of the Study With the raging scourge of cancer in the world today, nanotechnology provides the field of medicine with promising hope for assistance in its diagnosis and treatment as well as improving the general quality of life.Humans have the potential to live healthier lives in the near future due to the innovations of nanotechnology. Some of these innovations include: Disease diagnosis, prevention and treatment of disease, better drug delivery system with minimal side effects and tissue reconstruction. 1. 3. Objective of the Study This research work is designed to achieve the following objectives: ? Design and production of nano-tech devices and equipment for the diagnosis of diseases such as cancer. ?To develop a model that predicts the method involve in the diagnosis, prevention and treatment of diseases such as cancer. Design of nanoparticles for nano-tech applications such as tissue reconstruction. ?To determine the method that will best optimize the drug delivery s ystem with minimal side effects. 1. 4. Scope and Limitation of the Study The scope of this research work shall be limited to the application of nanotechnology in the diagnosis, prevention and treatment of cancer as highlighted in the problem statement of this research work. 2. 0 LITERATURE REVIEW The word â€Å"nano† is derived from the Greek â€Å"nanos†, directly translating to English as â€Å"dwarf†.From the very literal meaning of the word, therefore, it is inferred that the science is operated on a miniature scale. When working at a nanoscale, the prefix â€Å"nano† is used as an SI unit to denote any value multiplied by 10-9, meaning that a nanosecond is roughly a billionth of a second and a nanometre equates to a billionth of a metre. Ten hydrogen atoms lined up side by side would equate to a length of 1nm; in fact, most atoms are a miniscule 0. 1-0. 2nm wide. Due to the fact that work on a cellular level is done primarily at a nanoscale, it is th erefore unsurprising that nanotechnology has paved the way for a vast quantity of iological development, and a great majority of the findings encountered have led to cutting edge breakthroughs in this area (Harry, 2005). Nanotechnology offers various exciting prospects to every aspect of life. From dietary supplements to clothing, nanotechnology is evolving rapidly all around us. It offers numerous possibilities, especially in the medical sector of nanoscience (nanomedicine). Nanomedicine can be defined as â€Å"the design and manipulation of nanoparticles, particularly as applied to the medical diagnosis and treatment of disease. Examples of recent nanomedical developments include; the use of nanoparticles with antibacterial properties in hospital equipment and the development of magnetic nanoparticles being used to target disease, reducing the necessity of surgery and the associated risks. A further innovation in nanomedicine has been manufacturing drugs as nanoparticles as they are thought to be absorbed more easily into the body because of their size. It could offer easier methods of locating and targeting specific cells on a „nano? size level, on an atomic scale, and delivering drugs to these cells.This is good because often very powerful drugs are needed to kill mutated cells such as tumour cells, and these drugs would be hazardous if they came into contact with normal functioning cells (Mohd & Jeffery, 2007). 2. 1 Nanotechnology preventive approach In general, the best way to eliminate a problem is to eliminate the cause. In cancer, the problem can be perceived differently at various stages of the disease. Most apparently, if genetic mutations are the underlying cause, then we must counteract the causes of the mutations.Unfortunately, genetic mutations are caused by artificial or natural carcinogens only some of the time. At other times, they may occur spontaneously during DNA replication and cell division. With present science and technology the re is very little we can do to prevent this from happening. However, in all other cases, eliminating the carcinogens is indeed a highly effective way of cancer prevention. But most patients do not recognise the problem until it has actually occurred, which makes preventive medicine a rarely utilised, although a highly effective form of cancer prevention.Even so, is there a way to eliminate cancer through nanotechnology before it starts? Although there is little current research on preventive treatments using nanotechnology, they are indeed possible. After a careful review of the most advanced disease-time nanoscale treatment methods, one can easily see why the proposed nanotechnology alternatives to current preventive treatments have so strongly attracted the attention of the scientific and medical communities in recent years. In fact, nanotechnology-based treatments are no more challenging to devise than the currently used disease-time treatment methods.Nonetheless, it requires tim e and monetary investments to develop such treatment methods in short time. (Greider and Blackburn, 1996). 2. 2 Method of Disease Diagnosis using nanotechnology 1. Diagnosis and Imaging: Nanobiotech scientists have successfully produced microchips that are coated with human molecules. The chip is designed to emit an electrical impulse signal when the molecules detect signs of a disease. Special sensor nanobots can be inserted into the blood under the skin where they check blood contents and warn of any possible diseases.They can also be used to monitor the sugar level in the blood. Advantages of using such nanobots are that they are very cheap to produce and easily portable. (Harry, 2005) 2. Quantum dots: Quantum dots are nanomaterials that glow very brightly when illuminated by ultraviolet light. They can be coated with a material that makes the dots attach specifically to the molecule they want to track. Quantum dots bind themselves to proteins unique to cancer cells, literally br inging tumors to light. (Weiss, 2005). 2. 3 Application of Nanotech in Drug Delivery SystemNanobots are robots that carry out a very specific function and are just several nanometers wide. They can be used very effectively for drug delivery. Normally, drugs work through the entire body before they reach the disease-affected area. Using nanotechnology, the drug can be targeted to a precise location which would make the drug much more effective and reduce the chances of possible side-effects (Perkel, 2004). The drug carriers have walls that are just 5-10 atoms thick and the inner drug-filled cell is usually 50-100 nanometers wide. When they detect signs of the disease, thin ires in their walls emit an electrical pulse which causes the walls to dissolve and the drug to be released. Aston Vicki, manager of BioSante Pharmaceuticals, says â€Å"Putting drugs into nanostructures increases the solubility quite substantially†. (Harry, 2005) 2. 4 Nanotechnology approaches for cancerous cell destruction Preventive treatments are not much good to those who have already developed the disease. And since these are the people who require the most immediate medical help, it is no wonder that a majority of innovative treatments are focused here.Again, there are several ways to view the problem. The traditional approach is to simply eliminate the causing agents, or the cells that make up the tumour and end their pararcine signalling effect. This method actually dates back to the mid-17th century, when John Hunter, a Scottish surgeon first suggested the surgical removal of the tumour (Denmeade and Isaacs, 2002). Of course, we have made great progress in the last 350 years, but the idea remains the same. If we see the cancerous cells of the tumour as the causing agents of the disease, then the obvious strategy is to remove or to destroy them.The most significant recent breakthroughs have been made in this area. A relatively long-standing strategy dating back to the 1950s is to flood the body with substances that are especially toxic to tumour cells. Unfortunately, tumour cells are not dissimilar enough from healthy cells to distinguish one from the other using such large-scale techniques. A drug that is especially toxic to tumour cells is usually also toxic to healthy cells, and simply flooding the entire body with it causes system-wide damage and serious side effects.Almost everyone has heard of or seen chemotherapy patients who have lost their hair, lost significant weight, or developed other serious disorders (Silva, 2004). 2. 5 Physics and Engineering Concepts in Cancer Treatment Aside from destroying cells directly, we can take a more elegant approach to tumour elimination. Massand energy balance are well understood and are widely used in all types of science and engineering. Furthermore, these concepts are quite general, and can be applied to other fields as well, such as medicine.The general principles of mass balance, energy conservation and e ntropy production are applicable to bio systems as well as industrial processes. Thus, we can define the malignant tumour as our bio system and proceed to investigate the mass, energy and entropy inputs, outputs and accumulations. (Mansoori et al. , 2007). Since our ultimate goal is to destroy the tumour, we realise that this can be achieved by limiting or eliminating the inputs of the needed nutrients and the useful energy that are vital to its growth and survival.Likewise, we can limit the outputs, which are necessary for the tumour cells to get rid of toxic waste products that are left over from the multitude of biochemical reactions continuously taking place. Furthermore, basic anatomy and biology tell us that cells within the human body get a vast majority of their nutrients and energy from the bloodstream, and likewise use the bloodstream to eliminate the toxins. Cells that are cut off from circulation quickly undergo necrosis and are effectively eliminated. Therefore, our goa l is to separate the tumour from the circulation in order to kill it.Numerous studies have explored the possibility of isolating cancer tumours from the bloodstream. (Reynolds et al. , 2003). 2. 6 Tissue Reconstruction Nanoparticles can be designed with a structure very similar to the bone structure. An ultrasound is performed on existing bone structures and then bone-like nanoparticles are created using the results of the ultrasound, the bone-like nanoparticles are inserted into the body in a paste form. When they arrive at the fractured bone, they assemble themselves to form an ordered structure which later becomes part of the bone (Adhikari, 2005). 3. 0 MethodologyThis research work shall use the following methods or approaches to achieve its aim and objectives: †¢Top – down technique: The top – down technique begins with taking a macroscopic material (the finished product) and then incorporating smaller scale details into them. The molecules are rearranged to get the desired property. This approach is still under immense research as many of the devices used to operate at nanolevel are still being developed. †¢Bottom – up approach: The bottom – up approach begins by designing and synthesizing custom made molecules that have the ability to self- replicate.These molecules are then organized into higher macro-scale structures. The molecules self replicate upon the change in specific physical or chemical property that triggers the self replication. This can be a change in temperature, pressure, application of electricity or a chemical. The self replication of molecule has to be carefully controlled so it does not go out of hand. 4. 0 Expected Contribution of the Work to Knowledge Though, nanotechnology is still in its early stage, but it is of worthy note to know that it has began to gain application as it is already helping patients all over the world today.As further research continues in this field, more treatments will be discovered. Many diseases that do not have cures today may be cured by nanotechnology in the future. As part of contribution to knowledge, the result that shall be established in this research work may be useful in the development of indigenous methods and model on the diagnosis, prevention and treatment of cancer. 5. 0 Conclusion Prevention, diagnosis and treatment of cancer have always been a formidable medical challenge. In fact, cancer has long been considered an incurable disease and it is grouped with Hepatitis C and AIDS.Throughout the bulk of human history, cancer tended to be fatal in those who were unfortunate to develop it. Cancer will continue to be a big problem since it is a disease related mostly to age. As our population average age increases due to medical advances, cancer will be a major disease of the aging. At the end of this research work, we may have been able to develop and design a model that will effectively be used to diagnose the disease of cacer, proff er measures and techniques on how it can be prevented and treated.Also, the principle surrounding the mechanism of how a better drug delivery system with minimal side effects concerning the cure of cancer must have been fully explored. All these will be tried and tested using our own indigenous nanotechnology in the area of genetic engineering which promises a brighter future in the field of medicine leading to the actualization of the objective of this research work. REFERENCES Greider, C. W. and Blackburn, E. H. (1996). ‘Telomeres, telomerase and cancer’, Scientific American, Vol. 274, pp. 80–85. Mohd A. K and Jeffery J. (2007). Nanotechnology: Application in medicine and possible side effects.Denmeade, S. R. and Isaacs, J. T. (2002). ‘A history of prostate cancer treatment’, Nature Rev. Cancer, Vol. 2, pp. 389–396. Reynolds, A. R. , Moghimi, S. M. and Hodivala-Dilke, K. (2003) ‘Nanoparticle-mediated gene delivery to tumor neovasculatu re’, Trends in Molecular Medicine, Vol. 9, No. 11, pp. 2–4. Mansoori, G. A; Pirooz, M; Percival, M; Siavash, J. (2007). Nanotechnology in Cancer Prevention, Detection and Treatment: World Review of Science, Technology and Sustainable Development, Vol 4. Adhikari, R. (2005). â€Å"Nanobiotechnology: Will It Deliver? † Healthcare Purchasing News. pg 1-3.

Biology Questions Essay

Q: Summarize the steps of the scientific method. Describe an experiment of your choice, which demonstrates the basic considerations that must be taken in the design of a good, manipulative experiment. Now that you know some details of how scientists solve problems, how might you apply that knowledge to your daily life? A: The scientific method is one of the most if not the most important method that scientists use to learn about the earth. The goal is to apply the scientific method to determine a cause and effect relationship. The scientific method is made up of five detailed steps, these steps are: I. Make an observation A scientist sees something that he cannot explain, but is very interested and would like to explain the phenomenon. II. Ask Questions After the observation is seen, the scientist comes up with a group of questions such as who, what, where, why, and how. These questions significantly help the scientist narrow down the effects of the phenomenon. III. Develop a Hypothesis A hypothesis is a proposition set forth as an explanation for the occurrence of some specified group of phenomena, either asserted merely as a provisional conjecture to guide investigation or accepted as highly probable in the light of established facts. This hypothesis must have the ability to be either true, or false. IV. Make Predictions If the hypothesis is correct, scientists will make a prediction on how they think the experiment will end. This helps them have a starting point if the hypothesis is correct. V. Test the Predictions Experimental tests may lead to the confirmation of the prediction, or to the corruption of a prediction. If the hypothesis is not correct, the scientific method requires that the hypothesis must be modified. The prediction must agree with the experiment to believe that it is a valid description of nature. A great experiment that demonstrates the basic considerations that must be taken in the design of a good, manipulative experiment is Galileo’s leaning tower of Pisa experiment. Galileo had two balls of different masses, one heavy, and one light, and dropped them at the same time off of the leaning tower of Pisa. Galileo used the scientific method to make and prediction that their time of descent was independent of their mass. He found out that the objects fell at the same acceleration, proving hid hypothesis to be true, and also proving Aristotle’s theory of gravity to be false. I will apply the scientific method to my daily life in many ways. When I see an interesting observation that I do not know of, I will now create a mini hypothesis that applies to the observation. I will then ask some questions as in what is it? Or how does it do that? Etc. I will then either research the task at hand, or create my own demonstration on the phenomenon. If my hypothesis does not agree with the conclusion, I will re apply a new hypothesis and begin again. I enjoy learning new information and think this will be very amusing. Q: Describe the difference between anthropocentrism, biocentrism, and ecocentrism. Tell which of these positions your views of the environment most closely approximate. Why? A: Anthropocentrism is the tendency that human beings regarding themselves as the most significant entities in the universe. While Biocentrism is an ethical point of view that extends value to non-human species. Ecocentrism is used to regard a nature-centered system of values, as opposed to human and non-human centered. The position that I deem approximate to my view would be the Ecocentrism system of values. The reason I chose Ecocentrism is because in my opinion, a nature-centered sustem of values is very safe and rewarding. Too many people are human-centered and only care about themselves in this world. The Anthropocentrism people are destroying our environment on this planet by not caring about preserving this earth. If we are all nature-centered and do our best everyday to help preserve this earth, we can all change the world together and keep the air clean, the ground picked up, and the streets worry free for our future generation.

Elephant Man †Otherness Essay Essay

In Victorian London, Dr. Frederick Treves with the London Hospital comes across a circus sideshow attraction run by a man named Bytes called â€Å"The Elephant Man†. In actuality, the creature on display is indeed a man, twenty-one year old John Merrick who has several physical deformities, including an oversized and disfigured skull, and oversized and disfigured right shoulder. Brutish Bytes, his â€Å"owner†, only wants whatever he can get economically by presenting Merrick as a freak. Treves manages to bring Merrick under his care at the hospital – not without several of its own obstacles, including being questioned by those in authority since Merrick cannot be cured. Treves initially believes Bytes’ assertion that mute Merrick is an imbecile, but ultimately learns that Merrick can speak and is a well-read and articulate man. As news of Merrick hits the London newspapers, he becomes a celebrated curiosity amongst London’s upper class, including with Mrs. Kendal, a famed actress. Despite treated much more humanely, the question becomes whether Treves’ actions are a further exploitation of Merrick. And as Merrick becomes more famous, others try to get their two-cents worth from who still remains a curiosity and a freak to most, including to Bytes, who has since lost his meal ticket. The movie is loosely based on the real story of Joseph Merrick, known as â€Å"The Elephant Man†, who was thought to have suffered from elephantiasis and was perceived as being abnormal and different because of it. As portrayed in the movie, â€Å"The Elephant Man† was not classifyed as human but inhuman; a stranger to most. But who establishes what abnormal is? Do humans really believe they have that power? The Elephant Man† is just another example of someone different. To me he isn’t a monster, just misunderstood, and to label him like that suggest that there’s something within him that makes him less human that the rest of us. What I found hard to grasp was trying to understaning what lies in the concept of being abnormal in order to have an idea of what being no rmal means. I mean the notion of â€Å"us† suggests that there must be a majority to differ from; a range of normality that constitutes the abnormal. But who decides who’s normal and who’s not? What is normal anyways? I mean all it does is overrule, distort, and oppress everything that cannot meet it’s certain demands and qualifications. I rather be anything BUT normal. The main reason â€Å"The Elephan Man† was shund out of society was because of his physical features and â€Å"deformities†. But why should a physical difference come to mark a psychological one? In the movie the audience/spectators come to represent normality or the unit of ‘us’, standing in opposition to John Merrick. Because of his difference they see fit to classify themselves as ‘normal’ and different from him. And in a way they are. You see, unlike them, Merrick was highly capable of civilized behaviour. The characteristics of his physical appearance are not regarded as simple features but as deformities, as abnormal, even monstrous. Why do the spectators react so strongly towards something they find not to resemble themselves? Why do they, the unit of normality, need to point out that he is being different while they get to be normal? Why does the representation of normality feel an urge to define itself through what it is not? I believe that the process of othering in the movie could be explained by the simple idea that we don’t know what we are. I mean it seems that there is an infinity of things we could be as human beings, so why does society try and control something it has no power over? Is it affraid of what we can achieve, or does it not want us to achieve in the first place? I mean in Merricks case he wasn’t really classified as either one thing or the other. Just†¦ abnormal. In our world those we find not to fit into our group are left as objects of either exclusion, repulsion, repression, oppression; or of a kind of fetishism which nonetheless seems to limit the object of obsession. In â€Å"The Elephant Man’s† case he was neither desier nor wanted but feard. No one wanted to be-firend him, love him, see what he was like or even just say the odd hello. He was a freak, a caged spectical for people to point and laugh at. Treves, a doctor at London Hospital, stumbles upon and discovers â€Å"The Elephant Man† at a circus sideshow attraction run by the cruel and repulise Bytes and appoints himself the his owner so that he could present him to the members of his medical society. He’s given many detailed, scientific examination before being returned to his owner, but, being subject to his frequent beatings, he falls ill and is hospitalized in secret where Treves works. Treves discovers that â€Å"The Elephant Man† can talk and begins to referred to him as John Merrick. When the director of the hospital warns to have Merrick removed, Treves helps him and he is given permission to stay. Merrick’s stay in the hospital is mentioned in the papers, and soon curiosity leads a famous actress to visit him. The London nobility follows and Queen Victoria herself takes an interest in Merrick and starts protecting him. However, Merrick is not safe: his former owner forces Merrick back on the road with him and brings him to France. The dwarves and other â€Å"freaks† of this show free Merrick from his abusive owner. After being freed Merrick finds his way back to England and collapses in a train station, chased by a mob attracted by his deformity. Treves brings Merrick back to the hospital, which is now his home, and an actress who earlier showed her interest in him arranges the most beautiful night of his life: an attendance to the theatre where she works. After this experience, Merrick deliberatedly goes to sleep while lying down, though he knows this will suffocate him because of his condition. He dies in his sleep. From being â€Å"The Elephant Man† he’s turned into John Merrick, both characters who held the ability to frighten and horrify people by his mere look. In his appearance people recognize their own humanity, but apparently a distorted humanity. As the movie goes along, John Merrick is quietly humanized. He was dressed up, called upon by name (not nickname) and given conditions allowing him to show creativity. He read poetry, went to theatres, and drank tea like a true Englishman, you might say. Indeed, the monster more and more resembles a well taught pet. The recognition of Merrick as a human being, the terrible necessity to identify with this deformed edition of a human, makes us turn him into a monster; something we do to make the identification less obvious. It leads us to conclude that he is not human. He cannot be human, and if he is human, than he must be dumb, as the doctor assures his colleague. The doctor in this way removes Merrick from the field of humanity all over again. The doctor bases his notion of humanity on the presence of intellect, while according to the public it has to do with physical features. By saying this, the doctor distances Merrick from him just as the public does; there is only a small difference of procedure. But when Merrick starts talking and reciting the Bible he suddenly he belongs to our race again? How that makes sense, i’ll never know. Maybe, locked up behind the face of a monster, rests a human being. Reading Merriam-Webster dictionary defination of ‘normal’ it’s interesting to note how normality is also given a physical and mental connotation. And because of that we can therefore see how visible factors that differentiate an individual make him or her a possible target of othering.

Personal Philosophy of Life Essay Example | Topics and Well Written Essays - 2000 words

Personal Philosophy of Life - Essay Example Talking about true wisdom as the final destination to reach, what is actually true wisdom? For me, I believe that true wisdom is the ultimate knowledge which stays in perfect balance with the basic moral principle. Knowledge without morality is not wisdom, just cold ignorance. Is a man who knows how to destroy the world wise? He is, only if he chooses not to use that knowledge. Morality without knowledge is not wisdom either but blind foolishness. In a war or in wilderness, is a man who doesn’t want to kill wise? Unless he knows how to survive without killing, he is a dead man not a wise one. My ideal true wisdom might seem to be distant destination which can never be attainable. However, in a lesser degree, true wisdom is achievable in daily life. The first main point of the wisdom is balance. Thus, as long as the knowledge that we acquire and apply lies in harmony with the moral principle we value, we attain the lesser true wisdom†¦ for the time being. The next main point is progress. Once we stop trying to reach the ultimate true wisdom, the lesser wisdom we have will quickly fade away. To keep in direct contact with true wisdom, we need to gain more and more knowledge while basic moral values take the role as the safety measurement. Putting it in more systematical order, here are some steps we need to do to keep the wisdom within our grasp. First, we need to honestly realize what we don’t know. After that, we should allow our mind open to new ideas. Then, filtering these ideas using logic and moral principle should be our immediate task. Any idea which is not in harmony with the moral values we believe in should be stored away or even discarded from our mind. Finally, we need to put the acceptable knowledge into practice. If this new knowledge works well without significant ethical conflict, we should apply it either for personal gain or society’s benefit. Well, the path of wisdom does not end here though. We need to keep repeating the

Why did the united states adopt a policy of neutrality from 1914 to Essay

Why did the united states adopt a policy of neutrality from 1914 to 1917 - Essay Example US President Wilson publicly declared this neutrality policy, and most Americans welcomed it. In this essay, the main reasons behind America’s adoption of neutrality policy will be established. In addition, the effectiveness of this policy will be determined, basing on different events that occurred during the period 1914-1917. Since the late 19th Century, different countries in Europe had been forming unions and alliances, to enhance their preparedness for war. This saw the Independent German Kingdoms come together in the late 1870’s, and this became the most powerful in the continent. During that time, France highly invested in weapons, in anticipation of an attack from Germany, its long time enemy. The power status of German was a threat to most counties, including Russia, which had to take sides with France, Great Britain, and even German itself, to ensure its safety. The British effort to remain uninvolved in conflict was impossible, owing to its ownership of the most powerful navy in the world. Unrest in Europe was hastened by rebellious provinces of Austro-Hungarian Empire, and the Ottoman leaders who aimed at expansion of their empire. However, Europe was resistant to war and tried to withhold this for a long time. During this period, the Central powers included Ottoman Turks, Germans, and A ustro-Hungarians, while their rivals, the entente powers included France, Great Britain, and Russia (U.S Department of State Web). The United States of America dissociated itself from these events, even though most of its citizens were generally inclined to England and the Entente powers. Most Americans did not want their county to participate in the war. America therefore distanced itself from these events, and hoped not to get involved in them. Most Americans, as well as their leaders, including the president and the congress then, adopted this perspective. The then president Woodrow Wilson introduced the â€Å"neutrality policy,† publicly citing that the USA

Review of Literature Term Paper Example | Topics and Well Written Essays - 1250 words

Review of Literature - Term Paper Example In chapter 1 of the book Global Islamic Politics, Husain discusses the connection between past and present revivalist movements. He asserts that Islam can be used as a tool for political changes. Like Nasr, he argues that Islam is too nuanced to be generalized as secular or extremist. Instead, its various concepts, such as jihad and taqlid or adherence to legal rulings, have been used and interpreted by diverse Islamic movements. The Quran is subject to diverse interpretations, because personal beliefs color the many ambiguous concepts and statements in it. It supplements the political dimension of Islam and can fit nicely into Islam: Religion, History and Civilization by Nasr. Love and friendship are integral concepts to Islam and can be used to promote interfaith interactions and religious tolerance. In a speech to the pope called â€Å"We and You-Let Us Meet in God’s Love,† Nasr asserts that Christianity and Islam share similar fundamental beliefs in one God and in t eaching the importance of faith in daily living. He understands that there are also core differences in Islamic and Christian beliefs and practices, but he stresses that these differences are not enough to justify centuries of conflict and opposition. He calls for peace between these religions and their followers, as they both pursue a life dedicated to God. He believes that it is possible for Christians and Muslims to be friends, since they are both advocates of love and peace: â€Å"We submit to Him, and ask for His help and affirmation in carrying out this momentous task of meeting with you in friendship and peace under the banner of that Common Word that unites us† (Nasr 4). This article reinforces the article by Chittick on love and friendship. Islam is not a religion of violence, but a religion of love and peace. Chittick argues that love and friendship cannot be separated in Islamic spirituality, because in Persian and Arabic languages alone, saying â€Å"I love youâ €  relates to having a friend in that person that one loves: â€Å"†¦to say â€Å"I love you† in Persian you say dustat daram, literally, â€Å"I have you as a friend† (1). He says that people should understand that the true aim of their love is God, and so they have to act in the kind of love that is characterized by â€Å"God’s beautiful character traits† (Chittick 16). God sends prophets, who teaches people how to love: â€Å"Only when they learn to love by following the prophetic example can they truly love God, and as a function of love for God, love their neighbors as well† (Chittick 18). This article is comparable to the speech of Nasr, because it signifies that love and friendship can also exist among different religions. Love should be the center of interfaith dialogues and instead of spreading hate and aggression, all religious and non-religious people should promote love and friendship that are based on the core of the human spi rit, as Chittick contends. Muslims are widely distributed across the world, and so they cannot be treated as a very small minority. According to the Pew Research Center: â€Å"A comprehensive demographic study of more than 200 countries finds that there are 1.57 billion Muslims of all ages living in the world today, representing 23% of an estimated 2009 world population of 6.8 billion† (1). The main point of this article is that Islam is a potent force to